ElmoMC SimplIQ Digital Servo Drives-Solo Trombone Installation Guide - Manual (Page 18)

Solo Trombone Installation Guide Installation
MAN-SOLTROIG (Ver. 1.203)
www.elmomc.com
18
3.3. Pinouts
The Solo Trombone has nine connectors.
3.3.1. Connector Types
The Solo Trombone has the following types of connectors:
No.
Pins
Type Port Function
2 5.08 mm Pitch J18 Aux connection
7 8 mm Pitch J14 Power + Motor Power
4 2.54 mm Pitch J5 Motor (Brake, PTC)
20 2.54 mm Pitch J7 I/O
3 2.54 mm Pitch J22 Not in use
12 2.54 mm Pitch J3 Communication
16 2.54 mm Pitch J10 Main Feedback
8 2.54 mm Pitch J9 Main Feedback Buffered Output
16 2.54 mm Pitch J6 Auxiliary Feedback
Connector Locations
Table 1: Connector Types for the Solo Trombone