C multiple connections topology – ElmoMC SimplIQ Digital Servo Drives-Solo Trombone Installation Guide User Manual
Page 24
Advertising
![background image](/manuals/558384/24/background.png)
Solo Trombone Installation Guide
Installation
MAN-SOLTROIG (Ver. 1.203)
24
3.3.3.2.c
Multiple Connections Topology
In a multi-axis application, it is likely that a single power supply can feed several drives in
parallel.
This topology is rather economic, by reducing the number of power supplies and wiring, but
most importantly, it utilizes an "energy-sharing" environment among all the drives that are
sharing the same DC bus network.
Figure 5: Non-Isolated Three-Phase multiple Connection Topology
The power supply is connected directly to the mains AC line and feeds more than one drive.
Advertising