ElmoMC SimplIQ Digital Servo Drives-Solo Trombone Installation Guide - Manual (Page 40)

Solo Trombone Installation Guide Installation
MAN-SOLTROIG (Ver. 1.203)
www.elmomc.com
40
Main Feedback Auxiliary Feedback: Input
Software Setting YA[4] = 2
(Auxiliary Feedback: input)
Incremental
Encoder Input
Interpolated
Analog
(Sine/Cosine)
Encoder Input
Resolver Input
Potentiometer
Tachometer
Input
Absolute Encoder
Input
(All types)
Typical
Applications Any application where two Feedbacks are used by the drive.
The B1 Auxiliary Feedback port serves as an input port for the B2
Auxiliary incremental encoder.
For applications such as Follower, ECAM, or Dual Loop.
Main Feedback:
Incremental Encoder
OR Interpolated
Analog (Sin/Cos) Encoder
OR Resolver
OR Potentiometer
OR Tachometer
OR Absolute (all types)
Auxiliary Feedback:
B1: Differential Auxiliary
Encoder Input
Auxiliary Feedback:
B2: Differential
Buffered
Encoder Output of B1