ElmoMC SimplIQ Digital Servo Drives-Solo Trombone Installation Guide - Manual (Page 27)

Solo Trombone Installation Guide Installation
MAN-SOLTROIG (Ver. 1.203)
www.elmomc.com
27
3.3.5. Motor (Brake, PTC)
Pin (J5) Signal Function
1 BRAKE - Brake (-) (coming from the motor)
2 BRAKE + Brake (+) (coming from the motor)
3 PTC Motor Protection Sensor (coming from the motor)
4 PTC Motor Protection Sensor (coming from the motor)
Pin Positions
Table 4: The Motor Brake and PTC Connector