ElmoMC SimplIQ Digital Servo Drives-Solo Trombone Installation Guide - Manual (Page 3)

Revision History
Version Details
1.0 Initial release
1.1 Update to site requirements. Sections 4.3 and 4.3.1:
Auxiliary Supply Voltage range: 18 V to 30 V.
1.2 September 2012 Change the overvoltage in 800 V mode, Pin layout, UL
recognition, and further optional versions added
Updated the Section 1.3: Directives and Standards and
Section 4.11 (Compliance with Standards).
“Metronome” was replaced by the “Composer” software.
1.201 February 2013 Added a caution and recommendation on the type of
cleaning solution to use for the Elmo unit.
1.202 June 2014 Document update
1.203 July 2014 General document update