Sensaphone SCADA 3000 Users manual - Manual (Page 136)

14-12
SCADA 3000 User’s Manual
akLeft: Anchors the element a fixed distance from the left side of the palette.
akRight: Anchors the element a fixed distance from the right side of the palette.
akTop: Anchors the element a fixed distance from the top of the palette.
Autosize (Label): Automatically sizes the background box to the size of the text.
Brush (Shape):
Color: Color fill for the shape.
Style: Fill patterns for the shape.
Caption (Label): Name or text assigned to graphic.
Center (Image): Checkbox.
Color: Background color (of Label or element if applicable)
Constraint: Limits the maximum and minimum size of the label/graphic.
MaxHeight: Sets the maximum height. (0 disables this property)
MaxWidth: Sets the maximum width. (0 disables this property)
MinHeight: Sets the minimum height. (0 disables this property)
MinWidth: Sets the minimum width. (0 disables this property)
Font: Sets the default font for labels and text. Click in the font box, then click the
small button at the end of the box to select a font.
Charset: Specifies the character set of the font.
Color: Sets the color of the text.
Height: Sets the height of the font object in pixels. If you wish to use a specific
point size, you should set the size property.
Pitch: Can be set to one of three values: fpDefault, fpFixed, or fpVariable. Using
fpDefault as the pitch value will cause the default pitch style to be used with the
font. The fpFixed and fpVariable values can be used to explicitly set the pitch; a
value of fpFixed causes each character in the font to have the same width (mono-
spacing), while a value of fpVariable allows different characters within a font to
have unique widths.
Size: Sets the point size of a font object. If you need to ensure that the font fits
within a specified area, you can manipulate the Height and Pitch properties.
Style: Sets the default style of the font or text.
fsBold: Sets the default to boldface.
fsItalic: Sets the default to italic.
fsStrikeout: Forces a line through the font.
fsUnderline: Underlines the text as default.
Height: Vertical size in pixels (over-ridden if you chose a Max/Min Height).
Hint: Text shown on mouseover.
Incremental Display (Image): Checkbox.
Layout (Label): tlBottom, tlCenter, tlTop. Locates the label text to the top, bottom or
center of the box.
Left: X coordinate of left edge of graphic or label on screen.