Sensaphone SCADA 3000 Users manual - Manual (Page 216)

19-2
SCADA 3000 User’s Manual
Figure 2: Control Center Options Main Tab
If your internet access is available all of the time, continuously, then choose Always On for your
access type. If your internet access requires you to dial up using your modem, then choose
Dialup Networking Phone Book Entry. Select the Phone Book Entry in the drop-down selec-
tion box that connects to your internet service provider. Next, select the Comm port that your
modem uses to connect to the internet. (If you are not sure which Comm port your modem
uses, then go to My Computer, double-click on Dialup Networking, right-click on the dial-up
networking entry for your ISP and choose Properties. Next, click on the Configure button and
locate the COM port information.)
Note: You must have your internet account Username and Password saved in order
for the SCADA 3000 software to automatically log in.
If your service provider does not use Microsoft Dialup Networking then no names will appear
in the Phone Book Entry list and you will have to use a different internet service provider.
Companies such as America Online, which use proprietary software, will not work with the
Web Status feature.
Global Web Status Settings
Your web page will be uploaded to an internet server using FTP (File Transfer Protocol).
Listed below are several parameters which are required for FTP to access and load your web
page to the designated web server. Contact your internet service provider to determine the
proper settings.
Host Name (location of your web site)
Remote Directory (folder within the web site where the pages will upload)
Username (your account information necessary to access the web server)
Password (your account information necessary to access the web server)
Click on the Web Status tab to bring up the following screen: