Sensaphone SCADA 3000 Users manual - Manual (Page 54)

6-2
SCADA 3000 User’s Manual
The terminal blocks for wiring the outputs (and inputs) are removable. They should only
be removed or attached when power to the SCADA 3000 is OFF. If for instance you had to
return your SCADA 3000 for service, you could remove the terminal blocks in order to main-
tain your current wiring configuration. To remove terminal blocks use your thumb or forefin-
ger to push the screw section of the block straight out. (See figure below).
Figure 2: Removing terminal blocks