Sensaphone SCADA 3000 Users manual - Manual (Page 6)

iv
SCADA 3000 User’s Manual
FCC ReqUIRemeNTS
Part 68: The SCADA 3000 complies with Part 68 of the FCC rules. On the back of the unit
there is a label that contains, among other information, the FCC Registration Number and the
Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this
information to your local telephone company.
The REN is useful to determine the quantity of devices that you may connect to your tele-
phone line and still have all of those devices ring when your telephone number is called. In
most, but not all areas, the sum of the RENs of all devices connected to one line should not
exceed five (5.0). To be certain of the number of devices that you may connect to your line, you
may want to contact your local telephone company to determine the maximum REN for your
calling area.
This equipment may not be used on coin service units provided by the telephone company.
Connection to party lines is subject to state tariffs.
Should the SCADA 3000 cause harm to the telephone network, the telephone company
may discontinue your service temporarily. If possible, they will notify you in advance. But
if advance notice isn’t practical, the telephone company may temporarily discontinue service
without notice and you will be notified as soon as possible. You will be informed of your right
to file a complaint with the FCC. The telephone company may make changes in its facilities,
equipment, operations, or procedures where such action is reasonably required in the opera-
tion of its business and is not inconsistent with the rules and regulations of the FCC that could
affect the proper functioning of your equipment. If they do, you will be notified in advance to
give you an opportunity to maintain uninterrupted telephone service.
If you experience trouble with this equipment, or you need information on obtaining service or
repairs, please contact:
Sensaphone
901 Tryens Road, Aston, PA 19014
610.558.2700
Fax: 610.558.0222
The telephone company may ask that you disconnect this equipment from the network until
the problem has been corrected or until you are sure that the equipment is not malfunctioning.
Part 15: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his
own expense.