Rockwell Automation 160 SSC Series C FRN 7.xx - Manual (Page 81)

CE Conformity C-5
Low Voltage Directive 73/23/EEC Compliance
This product complies with Low Voltage Directive 72/23/EEC when conforming
with the following installation requirements:
• Review Chapter 1, Important Precautions and other ATTENTION statements
throughout this manual prior to installation of the drive.
• The drive is intended to be installed with a fixed connection to the earth. The
use of residual-current-operated protective devices (RCDs) or ground fault
indicators is not recommended. If unavoidable, the Bulletin 160 is compatible
with type B RCDs only.
• The drive should be installed in an appropriate or suitable enclosure.
Important: The conformity of this drive and filter to any standard does not
guarantee that the entire installation will conform. Many factors
can influence the total installation and only direct measurements
can verify total conformity.