Rockwell Automation 1764-xxxx MICROLOGIX 1500 PROGRAMMABLE CONTROLLERS - Manual (Page 121)

Publication 1764-UM001B-EN-P - April 2002
Replacement Parts B-3
Battery Handling
Follow the procedure below to ensure proper battery operation and
reduce personnel hazards.
•
Use only for the intended operation.
•
Do not ship or dispose of cells except according to
recommended procedures.
•
Do not ship on passenger aircraft.
Storing
Store lithium batteries in a cool, dry environment, typically +20°C to
+25°C (+68°F to 77°F) and 40% to 60% humidity. Store the batteries
and a copy of the battery instruction sheet in the original container,
away from flammable materials.
Transporting
One or Two Batteries
Each battery contains 0.23 grams of lithium. Therefore, up to two
batteries can be shipped together within the United States without
restriction. Regulations governing shipment to or within other
countries may differ.
ATTENTION
!
•
Do not charge the batteries. An explosion could
result or the cells could overheat causing burns.
•
Do not open, puncture, crush, or otherwise
mutilate the batteries. A possibility of an
explosion exists and/or toxic, corrosive, and
flammable liquids would be exposed.
•
Do not incinerate or expose the batteries to high
temperatures. Do not attempt to solder batteries.
An explosion could result.
•
Do not short positive and negative terminals
together. Excessive heat can build up and cause
severe burns.