Cable selection guide – Rockwell Automation 1764-xxxx MICROLOGIX 1500 PROGRAMMABLE CONTROLLERS User Manual
Page 84
Publication 1764-UM001B-EN-P - April 2002
4-16 Communication Connections
Cable Selection Guide
1761-CBL-AP00
1761-CBL-PM02
Cable
Length
Connections from
to AIC+
External Power
Supply
Required
(1)
Power
Selection
Switch
Setting
1761-CBL-AP00
1761-CBL-PM02
45cm (17.7 in)
2m (6.5 ft)
1764-LRP processor, channel 1
port 2
yes
external
SLC 5/03 or SLC 5/04 processors, channel 0
port 2
yes
external
MicroLogix 1000 or 1500
port 1
yes
external
PanelView 550 through NULL modem adapter
port 2
yes
external
DTAM Plus / DTAM Micro
port 2
yes
external
PC COM port
port 2
yes
external
(1) External power supply required unless the AIC+ is powered by the device connected to port 2, then the selection switch should be set to
cable.
1761-CBL-AM00
1761-CBL-HM02
Cable
Length
Connections from
to
AIC+
External Power
Supply Required
(1)
Power Selection
Switch Setting
1761-CBL-AM00
1761-CBL-HM02
45cm (17.7 in)
2m (6.5 ft)
MicroLogix 1000 or 1500
port 2
no
cable
to port 2 on another AIC+
port 2
yes
external
(1) External power supply required unless the AIC+ is powered by the device connected to port 2, then the selection switch should be set to
cable.