Data access tool (dat) -19, Data access tool (dat) – Rockwell Automation 1764-xxxx MICROLOGIX 1500 PROGRAMMABLE CONTROLLERS User Manual
Page 45
Advertising
Publication 1764-UM001B-EN-P - April 2002
Installing Your Controller 2-19
Data Access Tool (DAT)
1. Remove cover from processor.
2. Holding the DAT in the proper orientation (as shown), place the
DAT onto processor. Align DAT port on the processor with the
plug on the DAT.
3. Firmly seat DAT on processor; make sure it seats into place.
Advertising