Rockwell Automation 1440-TPS02-01RB XM-320 Position Module - Manual (Page 11)

Publication GMSI10-UM005C-EN-P - May 2010
Introduction 3
The XM-320 also includes a single on-board relay, expandable to five, two
4-20mA outputs, and a buffered output for each input. The module can collect
trend data on event, and monitor up to two alarms making it a complete
position monitoring system. The module can operate stand-alone, or it can be
deployed on a standard or dedicated DeviceNet network where it can provide
real-time data and status information to other XM modules, PLCs, DCS, and
Condition Monitoring Systems.
The XM-320 module is configurable over a DeviceNet network or using a
serial connection to a PC or laptop. Refer to Chapter 3 for a list of the XM-320
configuration parameters.
XM-320 Module
Components The XM-320 consists of a terminal base unit and an instrument module. The
XM-320 Position Module and the XM-941 Position Terminal Base are shown
below.
Figure 1.1 XM-320 Module Components
• XM-941 Position Module Terminal Base Unit - A DIN rail mounted
base unit that provides terminations for all field wiring required by XM
Position modules, including the XM-320.
POSITION 1440-TPS02-01RB
XM-941 Position Module Terminal Base Unit
Cat. No. 1440-TB-B
XM-320 Position Module
Cat. No. 1440-TPS02-01RB