Rockwell Automation 1440-TPS02-01RB XM-320 Position Module User Manual
Page 58
Advertising
Publication GMSI10-UM005C-EN-P - May 2010
50 Configuration Parameters
Figure 3.1 Normal Mode
The XM-320 provides monitoring facilities for the following machine
measurements when in normal mode.
•
Axial (thrust) Position
•
Differential Expansion
•
Case Expansion
•
Valve Position
IMPORTANT
For the valve position measurement, Sensitivity must be
set to "deg."
NORMAL MODE
(straight targets)
(angled targets)
(mixed targets)
Advertising