Metrohm 719 S Titrino - Manual (Page 131)

6.1 Technical specifications
719 S Titrino
127
6 Appendix
6.1 Technical specifications
Modes SET: Set End point Titration
MEAS: Measurement
CAL: pH calibration
Measuring inputs 2 high-impedance measuring inputs for pH, redox and ISE
electrodes.
1 reference input for a separate reference electrode. May
also be used as a differential amplifier.
1 measuring input for polarized electrodes.
1 measuring input for temperature sensor Pt100 or Pt1000.
Measuring range
pH value (pX) 0...±20.00, resolution 0.01
Voltage 0...±2000 mV, resolution 1 mV, error limit 0.1 % fullscale
Current 0...±200 µA, resolution 1 µA
Temperature –150.0...+450.0 °C, resolution 1 °C
Polarizer
Ipol
0...±127 µA, resolution 1 µA
Upol 0...±1270 mV, in steps of 10 mV
Measuring amplifier (at 25 °C and Titrino warmed-up)
Input
resistance >10 13 Ω
Offset current <3 ∗10 –13 A
Deviation of offset voltage 15 µV/K
Dosification
Volume of buret cylinder 1, (2), 5, 10, 20 or 50 mL
Resolution 10 000 steps per buret cylinder
Titrating burets 1 internal buret
Auxiliary burets 2 additional burets: 776 or 765 Dosimat
Materials
Housing Polybutyleneterephthalate (PBTP)
Keypad cover Polycarbonate (PC)
Display LCD, 2 lines of 24 characters each
Height of characters 5 mm
LED back-lit
Internal memory Method memory for up to 100 methods.
Data bank with 4 Metrohm methods.
Silo memory for sample data and results