Metrohm 719 S Titrino - Manual (Page 28)

2.6. Selection of the mode, key <MODE>
719 S Titrino
24
2.6 Selection of the mode, key <MODE>
Press key <MODE> until the desired mode is
displayed and confirm with <ENTER>.
Select the measured quantity pH, U, Ipol, Upol, (T) with
<SELECT> and confirm it also with <ENTER>.
The following modes can be selected:
• SET: Set Endpoint Titration.
• CAL: pH Calibration.
• MEAS: Measuring.
These standard modes are loaded with a set of default
parameters and are ready to work (only with SET an
end point has to be set).
MODE
–
>
;