Metrohm 719 S Titrino - Manual (Page 49)

2.11 Data output
719 S Titrino
45
Example of reports:
Full result report
Device label (if there is a designation, see page
22) and manual signature
Additional possibilities for report outputs
In addition to the reports which are printed at the end of the titration, various other reports
can be put out. There are 2 possibilities to select the reports:
1) <PRINT><SELECT><ENTER> Cursor is pressed repeatedly until the desired report
appears in the display.
2) <PRINT><keyX><ENTER> key X is the key under which the appropriate data
are entered.
List of reports:
Report Display with
<PRINT><SELECT>
<Key X>
Configuration report configuration CONFIG
Parameter report parameters PARAM
Current sample data smpl data SMPL DATA
Statistics report with the individual results statistics STATISTICS
All sample data from the silo memory silo SILO
Calibration data cal.data CAL.DATA
Operands C01...C19 C-fmla C-FMLA
Contents of the <DEF> key def DEF
Contents of the method memory with details of
the memory requirements of the individual
methods and the remaining bytes
user methods USER
METH
Calculation report with formulas and operands calc
Full result report full
Short result report short
All reports all
Complete report sequence of the last
determination, as defined under the <DEF> key
in the method
REPORTS
'fr
719 S Titrino 18200 719.0021
date 2002-03-13 time 17:34 3
pHc(init) 6.29 SET pH Acid
EP1 0.0628 ml 4.26
m value 5.02 mmol/l
mean(2) +/s s/%
m value 5.04 0.028 mmol/l 0.56
device label Titr 1 sign:
==============