Metrohm 789 Robotic Sample Processor XL - Manual (Page 19)

1.6 Accessories
Metrohm Sample Processor, Introduction 11
1.6 Accessories
Fig. 8 Accessories
With suitable accessories a Sample Processor can be extended to form
a comprehensive automated system. Depending on the tasks to be
carried out, various standard components or even custom-made spe-
cial parts can be used. Please consult the list of accessories on page
137ff.
Sample racks
Custom-made racks for various vessel sizes with any arrangement of
rack positions can also be supplied in addition to the standard racks.
786 Swing Head with robotic arm
The use of multi-row sample racks or external titration cells requires the
use of a 786 Swing Head. This motor drive, which is mounted on the lift
of one of the Sample Processor towers, can move different types of ro-
botic arm. Various types of standard robotic arms with accessories for
titrating on the sample rack or for sample transfer to an external titration
cell are available.
Stand support
If an external titration cell is to be used then we recommend the use of
a stand support. The stand support can accommodate a magnetic stir-
rer (e.g. model 801) and, with a support rod, enables you to attach a ti-
tration cell or other accessories.
786 Swing Heads
Stand support
Robotic arm with
titration head
Sample rack
Robotic arm for
sample transfer