Metrohm 789 Robotic Sample Processor XL - Manual (Page 33)

2.1 Installation flow chart
Metrohm Sample Processor, Installation 25
2 Installation
This section described the installation of all the components of a Sample
Processor and shows how it is connected to other instruments. Please
read through the following sections carefully and follow the instructions
in detail.
2.1 Installation flow chart
The following flow chart provides an overview of all the necessary instal-
lation work. Detailed information can be found in the given sections.
Setup Section 2.2
Connecting the mains cable Section 2.2.2
Connecting the keypad Section 2.2.3
* Mounting a 786 Swing Head Section 2.2.4
* Mounting a robotic arm Section 2.2.5
* Connecting the pumps Section 2.2.6
* Connecting a dosing device Section 2.2.7
Connecting the connection cables Section 2.3
Setting up the titration accessories Section 2.4.3
* Mounting the stand support Section 2.4.8
Mounting the safety shield Section 2.4.11
* optional