Banner PresencePLUS P4 COLOR Series - Manual (Page 12)

Direction Description Wire Color Pin #
Input RS-232 RX** Violet 9
Output RS-232 Signal Ground** Green 10
Input Common (Signal Ground) Blue 11
Input 10-30V dc Brown 12
** These three wires make up the RS-232 serial connection.
Note: All unused inputs and outputs should be connected to ground if configured as PNP, and connected to +24V
dc if configured as NPN. Serial input pins should be connected to ground.
2.2 Software Overview
The PresencePLUS application window is shown below.
2.2.1 Main Menu Toolbar
Use the Main Menu toolbar to navigate between the Sensor options. Proceeding from left to right, the buttons in the
Main Menu toolbar step through the process of creating and controlling an inspection. Each button is explained in the
illustration below and in the table that follows.
The following table describes the screen associated with each button in the Main Menu.
Banner Engineering Corp. Minneapolis, MN USA 12
2/2010 System Description