Banner PresencePLUS P4 COLOR Series - Manual (Page 22)

5. Start the sofware.
6. Upon initial startup, the software communication is not configured, and the following error message is displayed.
7. Click Yes to open the Communication screen.
8. Establish communications as follows:
Ethernet
Connection
1. When the software is started for the first time, the IP address is "Localhost." Choose Ethernet
(RJ 45).
2. Change the IP address to 192.168.0.1 (default IP address of the sensor).
3. Click OK.
Banner Engineering Corp. Minneapolis, MN USA 22
2/2010 Getting Started