Banner PresencePLUS P4 COLOR Series - Manual (Page 10)

In the application shown above, as each plastic formed part comes past the Vision sensor, an inspection is performed.
If the part is not shaped correctly as shown here, the inspection fails.
2.1.2 PresencePLUS ® P4 Components
The PresencePLUS P4 system consists of the Sensor and a PC with PresencePLUS software and the appropriate
connections. The Sensor requires lighting and a trigger device, and an optional video monitor can be connected.
Note: The trigger device can be any 10-30V dc photoelectric sensor (PNP or NPN) or a device with a similar
output.
Banner Engineering Corp. Minneapolis, MN USA 10
2/2010 System Description