Banner PresencePLUS P4 COLOR Series - Manual (Page 21)

b. On the Local Area Connection, right-click on Properties.
Note: The PC in the example above has a second network card which is used to connect to the camera so
it is using Local Area Connection 2.
c. In the dialog, click on Internet Protocol (TCP/IP) and click the Properties button.
4. In the Internet Protocol (TCP/IP) Properties dialog, select Use the following IP address and make sure that the
the IP address is 192.168.0.2, and the subnet mask is 255.255.255.0.
21 Minneapolis, MN USA Banner Engineering Corp.
Getting Started 2/2010