4 results, 5 inputs, 6 outputs – Banner PresencePLUS P4 COLOR Series User Manual
Page 337: 4 results 10.5 inputs 10.6 outputs
Description
Capture Control Option
Note: Capturing images slows sensor response. For highspeed applications
where the PC remains connected to the sensor, you should uncheck Image
Enable unless absolutely necessary.
10.4 Results
Description
Results Field
Number of passed inspections.
Pass Count
Number of failed inspections.
Fail Count
Total number of inspections.
Total Count
Clears teh counts for the selected inspection.
Reset Button
Note: Each of the stored inspections has its own Pass/Fail registers to store the Pass/Fail counts for that particular
inspection.
10.5 Inputs
Each numbered circle represents an input and its current state.
The legend below applies to the colored circles in the Inputs:
• Gray = Inactive (not currently available)
• Red = Active (not currently available)
• Not Visible = Not selected as input/output
10.6 Outputs
337
Minneapolis, MN USA
Banner Engineering Corp.
Run Screen
2/2010