Banner PresencePLUS P4 COLOR Series - Manual (Page 278)

Relative
For the Measurement type to be set to Relative, a Location-type tool must precede the Measure tool in the order of
operation. When the user selects the Relative type, the window indicates to what Locate tool the measurement is
relative.
The coordinate system of the Measure tool changes based on the rotation information the Location-type tool provides.
The x- and y-components and the angle of the measurement remain constant even if the part rotates in the camera’s
FOV. The relative Measure tool is relative to the rotation-enabled Locate tool. The part has rotated, but the x- and
y-distances and the angle of the line are largely unaffected.
Banner Engineering Corp. Minneapolis, MN USA 278
2/2010 PresencePLUS Software Tools