Banner PresencePLUS P4 COLOR Series - Manual (Page 353)

First set of pulses are for the 100's digit. •
• Second set of pulses are for the 10's digit.
• Third set of pulses are for the 1's digit.
The use will need to assert the Product Change signal for each set of pulses. To do this, the Product Change signal
must be asserted and held while the pulses representing the digit are being sent, and released after the last pulse is
given. Valid range of pulses for all digits is 0 - 9.
353 Minneapolis, MN USA Banner Engineering Corp.
P4 Product Change and Product Select Timing 2/2010