Banner PresencePLUS P4 COLOR Series User Manual

Page 376

Advertising
background image

bimodal

Histogram distribution of values with two peaks.

binary system

A vision system that creates a digitized image of an object in
which each pixel can have one of only two values, such as
light/dark, or zero/one.

Blob

cronym for Binary Large OBject. A connected region in a
binary image.

blooming

The "smearing" of regions of the image where the detected
brightness is at an excessive level for the receiving element,
due to electronic contamination from neighboring bright pixels.

C

c-mount

Threaded lens mount developed from 16 mm movie work.
used extensively for closed-circuit television. The threads have
a major diameter of 1" and a pitch of 32 threads per inch. The
flange focal distance is 0.69".

calibration

The relationship between the output of a measuring instrument
and some fiducial mark, an accepted standard of measurement,
or other reference datum for the purpose of reporting future
results relative to the reference.

centroid

The X and Y pixel coordinates of the center of mass in a two
dimensional Blob.

collimated

A beam of light in which all optical rays are parallel.

contrast

The range of difference between light and dark values in an
image.

correlation

A process whereby two image segments are compared to
determine their similarity, or to find the position at which
optimal similarity exists.

D

dark field

An illumination technique supplying the illumination at a
shallow (grazing) angle to the surface of the work piece.
Ordinarily only a negligible amount of light reflects into the
Sensor. Specular reflections occur off any abrupt surface
irregularities, and are detectable in the image.

depth of field

The in-focus range of an imaging system. Measured from the
distance behind an object to the distance in front of the object,
with all objects appearing in focus.

depth of focus

The range of lens-to-image plane distance having the image
formed by the lens appearing in focus.

deslant

In order for the OCV/OCR Vision tool to box correctly, there
must be a minimum of a 1 pixel-wide column between
characters. If the characters are slanted in such a way that they
overlap in ths 1 pixel-wide column, then the image may need
to be manipulated, or deslanted, so that the image can box
correctly.

diffuse

The process of redirecting incident light over a range of
scattered angles, while reflecting from or transmitting through
a material.

PresencePLUS

®

P4 OMNI/OMNI 1.3/OMNI Color

376

Advertising
This manual is related to the following products: