8 pattern count tool – Banner PresencePLUS P4 COLOR Series User Manual
Page 167
7.3.8 Pattern Count Tool
The Pattern Count tool locates a pattern within a reference image, using and uses that pattern as a reference pattern
to locate the same pattern in new images. A reference pattern is stored in memory. The tool searches for patterns that
are very similar to the reference pattern. All patterns that match the reference pattern are counted and the center of the
first pattern found is determined. The location of the first pattern found is returned to the user. This information can
be used to measure distances and angles. The reference pattern is remembered by the sensor in full gray scale detail,
so the tool can find patterns in various light levels.
Usage
• Verify fabric patterns
• Verify date/lot codes
• Inspect electronic component assembly
Fields
The following are fields on the Pattern Count tool Input tab:
•
on page 299
•
on page 169
•
on page 169
•
on page 169
•
on page 170
•
on page 170
Supported Platforms
BCR/BCR
1.3
GEO/GEO
1.3
EDGE/EDGE
1.3
AREA/AREA1.3
OMNI/OMNI
1.3
OMNI
Color
ProII/ProII
1.3
ProII Color
No
No
No
No
Yes
Yes
Yes
Yes
Pattern Count Input Tab
167
Minneapolis, MN USA
Banner Engineering Corp.
PresencePLUS Software Tools
2/2010