Pre-wiring for quartet, Pre-wiring for audio ports, Chapter 3 – ClearOne NetStreams Quartet User Manual
Page 19: Getting started -1, Pre-wiring for quartet -1, Pre-wiring for audio ports -1, Getting started
3-1
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
NOTE
Chapter
3
Getting Started
Pre-Wiring for Quartet
NetStreams recommends dealers wire the CEA 2030 standard for Multi-Room Audio
(1 CAT5 + 1 14AWG/4-conductor speaker wire). The speaker wire should run from
the MRP directly to the speakers. The CAT5 cable should run from the MRP to the
Quartet in-wall keypads. See Figure 3-1 for a pre-wiring diagram for Quartet.
NetStreams
recommends pre-wiring
according to Figure 3-1
to allow for a future
upgrade path to Musica
and DigiLinX.
Figure 3-1
Pre-Wiring Diagram
Pre-Wiring for Audio Ports
Additionally, run 1 CAT5 cable from each Quartet keypad up to 65 feet to the Audio
Port location. All CAT5/CAT5e cables should be terminated to the EIA/TIA 568a
standard.