Setting the sleep timer, Setting the rest and rise mode (rnr) – ClearOne NetStreams Quartet User Manual
Page 37
Quartet User’s Guide
4-16
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
SP-ZONE - to set up MONITOR for a super zone.
SET ALL - sets all the rooms to this setting.
Setting the Sleep Timer
The SLEEP setting is used to set the system to ramp the volume down for a specified
period of time and then turn it OFF. The SLEEP timer can be selected to run from 5 to
60 minutes, in 5 minute intervals.
1.
Use the down arrow key to highlight SLEEP.
2.
Press the MENU key to select SLEEP.
3.
Use the down arrow key to highlight MODIFY and press the MENU key. The
following screen appears:
Figure 4-19
Setting up SLEEP
4.
Use the right or left arrow key to turn SLEEP ON or OFF.
5.
Use the up or down arrow key to select the time.
6.
Enter a time by using the right or left arrow key.
7.
When you are done setting the time, press the MENU key again.
From the SLEEP menu, you can also select:
NEXT - to move to the next menu item.
PREV - to move to the previous menu item.
FACTORY - to return this setting back to the factory default.
SET ALL - sets all the rooms to this setting.
Sleep can also be turned off at the keypad using the shift key ( + *) followed by the
RPT key. To start a SLEEP mode at the keypad, press the shift key ( + *) followed by
the 7 key.
Setting the Rest and Rise Mode (RNR)
The Rest and Rise setting sets a specified period of time for the system to idle or wait
before it begins to play music. From the MRP, you can turn RNR ON or OFF (this can
also be done from the keypad), specify how long you want the music to continue