Adjusting sound settings in the room, Using the 5-band equalizer, Adjusting sound settings in the room -5 – ClearOne NetStreams Quartet User Manual
Page 26: Using the 5-band equalizer -5
Using the Setup Menus
4-5
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 4-6
New name appears under [Current]
From the NAME menu, you can also select:
NEXT - to move to the next menu item.
PREV - to move to the previous menu item.
SP ZONE - to change rooms included in super zone (not recommended for this
setting).
SET ALL - sets all the rooms to this name.
Adjusting Sound Settings in the Room
Using the 5-Band Equalizer
The Quartet features a 5-band equalizer to allow for further customization of the sound
quality in each room to your tastes. Adjust the sound in each room by 100Hz, 300Hz,
1KHz, 3KHz, and 10KHz.
1.
Use the down arrow key to highlight EQUALIZER.
2.
Press the MENU key to select EQUALIZER.
3.
Use the down arrow key to highlight MODIFY and press the MENU key. The
following screen appears:
Figure 4-7
Modifying the Equalizer
4.
Use the right and left arrow keys to select a tonal band from low to high
frequencies.