Naming a source, Naming a source -23 – ClearOne NetStreams Quartet User Manual
Page 44
Using the Setup Menus
4-23
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Naming a Source
The NAME setting changes the name of the source. To change a source name, follow
these steps:
1.
Use the MENU key to select NAME.
2.
Use the down arrow key to highlight MODIFY.
3.
Press the MENU key to select MODIFY and the following screen appears:
Figure 4-28
Modifying a Source Name
4.
Use the up and down arrow to scroll through the alphabet. The > button to shift the
alphabet to lowercase and numerical characters.
5.
After you have displayed the first letter of the new name, use the right arrow key to
move to the next letter.
6.
Use the up and down arrow keys and the right arrow key to select additional letters
as shown in Figure 4-29.
.
Figure 4-29
Entering new name
7.
When you are done entering letters, press the MENU key again. The new name
will appear under the text [Current].
From the NAME menu, you can also select:
NEXT - to move to the next menu item.
PREV - to move to the previous menu item.
FACTORY - returns the name to the factory default.
SET ALL - sets all the sources to this name.