Quartet keypad settings, Adjusting the keypad pilot light setting, Adjusting the keypad back light setting – ClearOne NetStreams Quartet User Manual
Page 39: Quartet keypad settings -18
Quartet User’s Guide
4-18
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Quartet Keypad Settings
Adjusting the Keypad Pilot Light Setting
The PL LIGHT setting adjusts the pilot light on the keypad. The pilot light illuminates
the top six keys above the arrow keys when the keypad is OFF.
To adjust the pilot light setting, follow these steps:
1.
Use the down arrow key to highlight PL LIGHT.
2.
Press the MENU key to select PL LIGHT.
3.
Use the down arrow key to highlight MODIFY and press the MENU key. The
following screen appears:
Figure 4-21
Adjusting the pilot light setting
4.
Use the up or down arrow key to turn lights ON or OFF.
5.
When you are done changing the lights on the keypad, press the MENU key again.
From the PL LIGHT menu, you can also select:
NEXT - to move to the next menu item.
PREV - to move to the previous menu item.
SP-ZONE - to set the pilot light for a super zone.
SET ALL - sets all the rooms to this setting.
Adjusting the Keypad Back Light Setting
The BK LIGHT setting adjusts the level of the backlight on the keypad keys and
specifies how long after last being touched before the backlight times out. The
backlight is the overall light illuminating the keypad.
To adjust the backlight, follow these steps:
1.
Use the down arrow key to highlight BK LIGHT.
2.
Press the MENU key to select BK LIGHT.
3.
Use the down arrow key to highlight MODIFY and press the MENU key. The
following screen appears: