Creating macros, Creating macros -3 – ClearOne NetStreams Quartet User Manual
Page 56
Learning IR
5-3
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
6.
Select the key on the sources’s remote you want to learn. Quartet displays the
following:
Figure 5-4
Selecting the key on the source’s remote
7.
Repeat the key again to confirm. The Quartet displays the following if the key has
been learned.
Figure 5-5
Successful IR learn
8.
If you want to create a Macro, press the right arrow key.
9.
Enter the Quartet’s remote key you want to learn it to and then the source’s remote
key you want to learn. You can create up to a 4-step macro.
10.
When you are done setting source remote commands or macros, press the MENU
key again.
From the IR LEARN menu, you can also select:
NEXT - to move to the next menu item.
PREV - to move to the previous menu item.
TEST - to test the Quartet remote key you have learned.
CLEAR - to clear all IR commands learned.
Creating Macros
You can create macros using the 2’s REPEAT, MACRO TIME, and KEY MACRO
menus. Macros can have a maximum of 4 steps.