Adjusting the fm tuner spacing, Adjusting the fm tuner spacing -25 – ClearOne NetStreams Quartet User Manual
Page 46
Using the Setup Menus
4-25
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
2.
Press the MENU key to select SENSITIVITY.
3.
Use the down arrow key to highlight MODIFY and press the MENU key. The
following screen appears:
Figure 4-31
Defining the tuner’s sensitivity
4.
Use the up or down arrow key to set the sensitivity to low, mid, or high.
5.
When you are done setting the sensitivity, press the MENU key.
From the SENSITIVITY menu, you can also select:
NEXT - to move to the next menu item.
PREV - to move to the previous menu item.
FACTORY - to return to the factory default.
SET ALL - to set all rooms to this setting.
Adjusting the FM Tuner Spacing
The SPACING setting defines how much spacing is between tuning intervals on a seek
or a manual tune up or down. You can set it from 50 to 200KHz.
To define the amount of spacing between tuning intervals, follow these steps.
1.
Use the down arrow key to highlight SPACING.
2.
Press the MENU key to select SPACING.
3.
Use the down arrow key to highlight MODIFY and press the MENU key. The
following screen appears:
Figure 4-32
Defining tuning interval