Setting system settings, Setting system settings -28 – ClearOne NetStreams Quartet User Manual
Page 49
Quartet User’s Guide
4-28
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 4-35
Setting presets automatically
Quartet will immediately begin to scan available stations and set presets when it
has good reception, until the presets are full or there is no more frequency to scan.
Quartet will return to the PRESET menu after the AUTO scan is complete.
The final menu item in the PRESET menu is SHOW. SHOW is used to show all FM
presets at once for easy review. To view the presets, follow these steps:
1.
Press the down arrow key to highlight PRESET.
2.
Press the MENU key to select PRESET.
3.
Press the down arrow key to select SHOW. Press the MENU key and presets 0-9
will show on the following screen:
Figure 4-36
Showing presets
4.
Use the right arrow to view presets 10 - 19.
5.
Press the MUTE key to return to the PRESET menu.
Setting System Settings
You set MRP Settings from the SYSTEM menu as shown in the following screen.