ClearOne NetStreams Quartet - Manual (Page 34)

Using the Setup Menus
4-13
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
NOTE
Intercom Room/Monitoring Settings
Do Not Disturb Setting (DND)
The DND setting can be enabled or disabled. If the DND feature is enabled, that
room’s keypad can be set to DND, however if the setting is disabled that room’s
keypad will not have DND available. If a room’s DND feature is enabled, the installer
can set the keypad’s default to ON or OFF. This is useful during a power outage when
the Quartet powers back ON, the room will come up with DND ON. Rooms with DND
turned ON will ignore party mode and all OFF commands, and will not receive pages
or room-to-room intercom requests. The DND menu contains two settings. The first
allows the ability to turn DND ON or OFF from the keypad.
To allow a user to change the DND setting at the keypad, follow these steps:
1. Use the down arrow key to highlight DND.
2. Press the MENU key to select DND.
3. Use the down arrow key to highlight MODIFY and press the MENU key. The
following screen appears:
Figure 4-16 Giving the room the ability to toggle ON and OFF Do Not Disturb mode
4. Use the left and right arrow keys change the setting to ENABLE or DISABLE to
give a user the ability to toggle ON or OFF Do Not Disturb mode from the room’s
keypad.
5. Next, you can press the down arrow key to toggle the current DND setting for the
room to room ON or OFF.
6. When you are done changing the DND mode settings, press the MENU key.
If DND is disabled, it
cannot be set to ON. From the DND menu, you can also select:
 NEXT - to move to the next menu item.
 PREV - to move to the previous menu item.
 FACTORY - to return this setting to the default setting.
 SET ALL - sets all the rooms to this setting.