Privacy settings, Privacy settings -14 – ClearOne NetStreams Quartet User Manual
Page 35
Quartet User’s Guide
4-14
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
NOTE
NOTE
If allowed by the
ENABLE setting,
DND can be turned
ON at the keypad
using the shift key (
+ *) followed by the
PLAY button.
Privacy Settings
PRIVACY allows a key pad to block being monitored. Privacy can be enabled or
disabled for the user to select their privacy setting from the keypad in the room. If it is
enabled, the room can select PRIVACY ON/OFF from the keypad. Disabled prevents
the ROOM from having the feature. The second option tells the system if the room
should have privacy turned ON or OFF when the system is turned ON. This is useful
during a power outage when the Quartet powers back ON, the room will come up in
Privacy mode.
To allow a user to change the privacy setting at the keypad, follow these steps:
1.
Use the down arrow key to highlight PRIVACY.
2.
Press the MENU key to select PRIVACY.
3.
Use the down arrow key to highlight MODIFY and press the MENU key. The
following screen appears:
Figure 4-17
Enabling the room to be monitored by another room
4.
Use the left and right arrow keys to either ENABLE or DISABLE the ability of a
user to change the privacy setting from the room’s keypad.
When a room is being
monitored, the MON
light on the keypad
illuminates.
5.
Next, you can press the down arrow key to change the PRIVACY setting to ON or
OFF. ON means other rooms cannot monitor this room. OFF means other rooms
can monitor this room.
6.
When you are done giving the room the ability to be monitored, press the MENU
key again.