Turning loudness on or off, Turning loudness on or off -8 – ClearOne NetStreams Quartet User Manual
Page 29
Quartet User’s Guide
4-8
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
4.
Use the up or down arrow key to turn 3D Sound ON or OFF.
5.
When you are done selecting the 3D sound feature, press the MENU key.
From the 3D SOUND menu, you can also select:
NEXT - to move to the next menu item.
PREV - to move to the previous menu item.
SP ZONE - to turn 3D sound ON or OFF in a super zone you have set up.
SET ALL - sets all the rooms to this setting.
Turning Loudness ON or OFF
The LOUD setting increases the amount of bass in the room.
To turn loudness ON, follow these steps:
1.
Use the down arrow key to highlight LOUD.
2.
Press the MENU key to select LOUD.
3.
Use the down arrow key to highlight MODIFY and press the MENU key. The
following screen appears:
Figure 4-10
Turning LOUD ON or OFF
4.
Use the up or down arrow key to turn LOUD ON or OFF.
5.
When you are done turning LOUD ON or OFF, press the MENU key.
From the LOUD menu, you can also select:
NEXT - to move to the next menu item.
PREV - to move to the previous menu item.
SP ZONE - to increase the amount of bass in a super zone you have set up.
SET ALL - sets all the rooms to this setting.