Locking a quartet keypad, Locking a quartet keypad -19 – ClearOne NetStreams Quartet User Manual
Page 40
Using the Setup Menus
4-19
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 4-22
Adjusting the backlight
4.
Use the right or left arrow key to set the backlight from 0 to 9.
5.
Press the down arrow key to select how long before the backlight times out. You
can select from Always ON up to 15 minutes.
6.
When you are done changing the backlight, press the MENU key again.
From the BK LIGHT menu, you can also select:
NEXT - to move to the next menu item.
PREV - to move to the previous menu item.
SP-ZONE - to set the backlight for a super zone.
SET ALL - sets all the rooms to this setting.
Locking a Quartet Keypad
The KEY LOCK setting is used to lock and unlock the keypad. When the keypad is
locked, the only allowed functions are to turn the room off (push currently selected
source key), responding to intercoms or pages.
To lock or unlock the keypad, follow these steps:
To adjust the KEY LOCK setting, follow these steps:
1.
Use the down arrow key to highlight KEY LOCK.
2.
Press the MENU key to select KEY LOCK.
3.
Use the down arrow key to highlight MODIFY and press the MENU key. The
following screen appears: