ADS Environmental Services FlowShark Pulse QR 775004 A1 - Manual (Page 145)

Parameter Settings 8-55
z Ethernet – communication via a local network (Ethernet) or a GSM/GPRS
gateway with static IP address SIM card
z Modem Æ Ethernet – (For the FlowShark Pulse, this option currently is
unavailable.)
While any variation in communication is possible, the unit must support the selected
option for communication to occur. The respective configuration is available on the
device ID posted on the unit (refer also to Chapter 4, System Overview and
Operation).
Figure 8-86 Selecting remote access
Ethernet
Choosing this option allows the user to designate whether to automatically assign the
IP address (required for unit access) or manually enter the address. Selecting YES
executes assignment automatically through a DHCP routine (similar to the Internet
PC setting Get IP address automatically). Selecting NO allows the user to enter the
unit IP address manually. Always select this option for applications involving a
GSM/GPRS gateway with static IP address SIM card. When manually entering an IP
address, ADS recommends using a network address assigned by the IT administrator.
Figure 8-87 Selecting automatic or manual IP address
Observe the current network configuration.
Figure 8-88 Assigning the IP address