ADS Environmental Services FlowShark Pulse QR 775004 A1 - Manual (Page 20)

Use and Specifications 2-3
Max. outer inductivities allowed 2 mH 1 mH 0.5 mH 0.2 mH
Max. outer capacities allowed 380 nF 430 nF 510 nF 660 nF
Sensor connections Ignition protection type intrinsically-safe
EEx ia IIB
Clamps D1...D5, E1...E5 for connection of accompanying sensors only
F1...F5, G1...G5 Type POA/...OCL/... according to TÜV 03
ATEX 2262
Max. values per circuit:
U 0 = 10.5 V
I
0
= 640 mA
rectangular characteristic
Max. outer inductivities allowed: 0.12 mH
Max. outer capacities allowed: 4.8 µF
The intrinsically-safe circuits are isolated galvanically safe from the remaining
circuits up to a peak voltage of 375 volts.
The certification is valid only when the corresponding label exists
on the transmitter or sensor nameplate.
For installation and initial start-up, perform all work in
accordance with the appropriate certificates of conformity and
testing from the respective authorities.