ADS Environmental Services FlowShark Pulse QR 775004 A1 - Manual (Page 89)

Initial Startup and Communication 7-7
Display
The FlowShark Pulse has a large, backlit graphic display with a 128- x 128-pixel
resolution.
Figure 7-6 Display
The top of the display provides five basic menus for selection:
z
RUN This menu represents the standard mode of operation. In addition to
indicating the name of the measurement location, this menu allows the user to
view time, flow rate, flow depth, average flow velocity (as well as flow
velocity distribution), daily totals, and error messages. It also includes a
function enabling the user to observe historical flow volume, flow depth, and
average flow velocity.
z
PAR This is the most extensive menu on the FlowShark Pulse. It exists for
setting the parameters for the measurement location, sensors, analog and
digital inputs and outputs, data storage and transmission, and regulator
function.
z
I/O This menu provides information concerning the internal operation of the
FlowShark Pulse. It allows the user to view all current readings, including the
values of analog and digital outputs and relays. It also displays sensor echoes
and individual velocity readings. In addition, it enables the user to determine
the memory remaining on the optional memory card as well as the time
remaining on the card (based on the cycle time).
z CAL This menu allows the user to calibrate flow depth offsets, set additional
velocity parameters, and simulate analog and digital outputs.
z
EXTRA This sub-menu enables the user to modify the basic display settings:
contrast, lighting, language, units, system times, and totalizer presets.