ADS Environmental Services FlowShark Pulse QR 775004 A1 - Manual (Page 163)

Parameter Settings 8-73
Use the up or down arrow keys to either enable or disable the previously selected
relay.
After selecting Relay Outputs, enter the PIN again. This will prevent unauthorized
personnel from executing simulations during operation.
Figure 8-122 Relay simulation
CAL Menu: Simulation
This function allows the user to simulate flow conditions by entering hypothetical
depth and velocity values that are not currently available. The FlowShark Pulse will
calculate the current flow measurement based on the simulated values and the
designated pipe dimensions. The results will be sent to the corresponding analog and
digital outputs.
Simulate the desired flow velocity by pressing the left or right arrow keys; simulate
the desired flow depth by pressing the up or down arrow keys.
Both simulated values will display in the table. The calculated flow value will
display above the table.
Figure 8-123 Flow measurement simulation