ADS Environmental Services FlowShark Pulse QR 775004 A1 - Manual (Page 95)

Parameter Settings 8-5
Operation Mode (RUN)
This menu displays when the unit is in standard operating mode. The parameters
contained in the following submenus are not essential for parameter setup:
Figure 8-3 Standard operating mode
Standard
This screen displays basic information including the measurement location name, the
time, and the current flow rate, velocity, flow depth (level), and flow volume (since
midnight by default).
Graphic
This screen indicates the velocity distribution in a vertical measurement path.
Pressing up/down arrow keys moves the indicator line in the corresponding direction.
The selected height and current velocity displays at the bottom (Figure 8-4)
This screen enables the user to view the current flow conditions at the selected
measurement location. The velocity profile should be distributed evenly without
excessive discontinuity (Figure 8-5).
Under poor flow conditions, change the position of the velocity sensor.
Figure 8-4 Flow velocity distribution (height = maximum depth; v-max = maximum velocity; Hx = current depth value;
Vx = current velocity value; horizontal line in graph represents measurement window indicator)