Rice Lake CLS-420 Cargo Lift Scale Installation Manual - Manual (Page 11)

CLS-420 Installation Manual 7
1.4 Accepting Weight Data to the Indicator
The 420 indicator can accept data in two different ways from the two-channel iQube and depending upon which
version is purchased, will come with different components. They are:
• Wired - coil cable
Figure 1-3. Coil Wired Signal Cable That Runs Between the Indicator and the Two-Channel iQube
• Wireless - attached onto the back of the 420 indicator and collects data from the two-channel iQube
without the use of a coil wire cable. The two-channel iQube uses a lithium-ion battery which is housed
on the scale.
Wireless
communication
between the
indicator to the two
channel iQube which
is located on the
forklift and is
powered by a
Lithium-Ion battery
housed in a battery
box.
Figure 1-4. Wireless Version of Communication