5), so that the lip of the cleat is – Rice Lake CLS-420 Cargo Lift Scale Installation Manual User Manual
Page 16
Advertising
11
CLS-420 Installation Manual
Bottom cleat
retaining bolts
Shim bolts
Bottom cleat
Illustration shown is
with part of the
flexure removed to
show shim bolt
location.
Insert a feeler gauge to measure a
.020 inch thickness between
bottom cleat and scale carriage.
Scale carriage
Figure 2-5. Bottom Cleat Location and Assembly
14. Now reattach the forklift tines to the scale assembly by attaching them in the center of the scale and sliding
them off to the sides.
Advertising