0 introduction, 1 scale carriage, Introduction – Rice Lake CLS-420 Cargo Lift Scale Installation Manual User Manual
Page 6
2
CLS-420 Installation Manual
1.0
Introduction
The CLS-420 Cargo Lift Scale is a rugged, dependable cargo lift scale that can withstand many years of repeated
use. When mounted on a forklift, the CLS-420 saves time and money by allowing you to weigh loads immediately
instead of carrying the load to a floor scale.
The CLS-420 scale carriage comes in three different sizes including a 34", 36" and a 38" carriage.
The CLS-420 is used with Rice Lake’s 420 digital weight indicator and setup and calibration of the indicator is
discussed in detail in the following sections.
On board Features
Features of the basic cargo lift scale include:
1.1
Scale Carriage
•
NTEP approved, Class III, 5,000 lb, 1:1000
•
Class II forklift, with 16" cleat style carriage
•
NTEP approved, Class III, 8,000 lb, 1:1000 (38" only)
•
Class III forklift with cleat style carriage (38" only)
•
Two (2) stainless steel load cells
•
Mechanical overload protection
•
Flexure plates with bolts welded into place
•
Cover plate
•
Welded centering pin
•
View port
•
Two-channel iQube
®
•
Wired or wireless communication
Figure 1-1. Fork Lift with CLS-420