Rice Lake CLS-420 Cargo Lift Scale Installation Manual - Manual (Page 63)

CLS-420 Installation Manual 53
D
AILY
I
NSPECTION
C
HECKLIST
F
OR
L
IFT
T
RUCK
S
CALE
U
SERS

Check scale carriage for loose, worn, bent or broken components.

Inspect fork tines for damage.

Check locking pins on fork tines.

Inspect coiled cable for pinched, rubbed, stretched or damaged areas.

Inspect power cable from indicator to battery for nicks or cuts.

Make sure power cable is routed out of harms way, fasten periodically to eliminate
potential problems.

Tighten cable connections at indicator j-box if necessary.

Inspect coiled cable clamps and cable ties to be sure all cable attachments are
secure.

Inspect indicator mounting bracket, isolation mounts and hardware for loose or
cracked parts.

Tighten bottom clamps on scale carriage if necessary. Raise carriage and visually
inspect.

Check and adjust the lift chain so the heel of the forks have 1/2” to 1” of clearance
from floor when the carriage is down and the mast is vertical.